Specifical parameter TOWER CRANE TC5013
1). maximum load capacity is 6t
2). maximum radius is 50m
3). Tip load is 1.3t
4). Independent height is 40m,
5). Max. Possible height is 150m.
6). Size of mast section: 1.6×1.6×2.5m
7). Material of mast section: All mast sections are manganese, 125×10, buckled square steel stiffened plate; Lower chord of jibs is manganese square steel.
8). Insure strictly quality examination before shipment and timely delivery.
9). If client needed, We will send one of her technician to the site of buyer to guide the erecting work.
10). Providing spare parts and training of operation and maintenance.
1). maximum load capacity is 6t
2). maximum radius is 50m
3). Tip load is 1.3t
4). Independent height is 40m,
5). Max. Possible height is 150m.
6). Size of mast section: 1.6×1.6×2.5m
7). Material of mast section: All mast sections are manganese, 125×10, buckled square steel stiffened plate; Lower chord of jibs is manganese square steel.
8). Insure strictly quality examination before shipment and timely delivery.
9). If client needed, We will send one of her technician to the site of buyer to guide the erecting work.
10). Providing spare parts and training of operation and maintenance.
| Rated load moment | kN. m | 630 | |||
| Max. load | t | 6 | |||
| Working radius | m | 3~50 | |||
| Hoisting height | Free standing height | 40 | |||
| Max. height | 151.2 | ||||
| Hoisting speed | 2 falls | m/min | 80/40.10 | ||
| 4 falls | 40/20/5 | ||||
| Slewing speed | r/min | 0.637 | |||
| Trolleying speed | m/min | 44/22 | |||
| Climbing speed | 0.4 | ||||
| min. descending speed levelly | < 7 | ||||
| Outer size of whole crane | Base frame | m | 8× 8 | ||
| Height of crane | Basic | 48.892 | |||
| Anchored | 160.892 | ||||
| Tip of jib to slewing center | 51.21 | ||||
| Tip of balanced jib to slewing center | 12.39 | ||||
| Total mass of whole crane | Structure weight | Basic | t | 36.62 | |
| Adhered | 72.79 | ||||
| Counterweight | 16.18 | ||||
| Power | kW | 36.45 | |||
| Allowable temperature | º C | -20~+40 | |||
| Power supply | 50Hz | ~380V± 10% | |||
| Mechanical load factor | Hoisting mechanism | M5 | |||
| Slewing mechanism | M4 | ||||
| Trolleying mechanism | M4 | ||||
| Hoisting mechanism | motor | Type | YZTD2012-4/8/24 | ||
| Power (kW) | 24/24/5.4 | ||||
| Height limiter | Type | DX-G | |||
| Steel wire rope | Model | 6W19-12.5-1770-I | |||
| Max. drawing force (N) | 12500 | ||||
| Falls | a=2 | a=4 | |||
| Hoisting speed (m/min) | 80.25 | 40.05 | 39.4 | 20.1 | |
| Rated lifting capacity (t) | 1.3 | 3 | 1.3 | 6 | |
| Min. descending speed levelly | m/min | < 7 | |||
| slewing mechanism | Motor | Type | YZR132M2-6 | ||
| Power (kW) | 3.7× 2 | ||||
| Turning speed (r/min) | 908 | ||||
| Reducer | Type | XX4-63.195 | |||
| Ratio | 195 | ||||
| Hydraulic couplings | Type | YOX250A | |||
| Slewing pinions | Modulus m | 10 | |||
| Teeth z | 15 | ||||
| Modification coefficient | +0.5 | ||||
| Slewing speed | r/min | 0.64 | |||
| slewing ring | ball like slewing ring of four point in a ling | type | 011@45@1250 | ||
| modulus m | 12 | ||||
| teeth z | 118 | ||||
| Hydraulic jacking mechanism | motor | Model | Y132M-4B5 | ||
| Power (kW) | 5.5 | ||||
| rated operating press | mPa | 25 | |||
| max. hoisting force | t | 50 | |||
| stroke of oil tank | mm | 1600 | |||
| space | mm | 2070 | |||
| diameter of oil tank | mm | φ 160 | |||
| oil tank piston diameter | mm | φ 110 | |||
| Jacking speed | m/min | 0.4 | |||
| Trolleying mechanism | motor | type | YDEJ132S-4/8 | ||
| power (kW) | 3.2/2.2 | ||||
| steel wire | type | 6× 19-7.7-1550 | |||
| reducer | type | XX2-12-38 | |||
| driving ratio | 38 | ||||
| Troellying speed | m/min | 44/22 | |||