Basic Info.
Model NO.
WTL-A700
Trademark
WTAU
Transport Package
Non-Fumigation Wooden Box
Specification
50*50*50 mm
Origin
Made in China
HS Code
8531809000
Product Description
1. Display
Load Moment Indicator (LMI),
also known as Rated Capacity Indicators (RCI), or a Safe Load Indicator (SLI) or an
Automatic Safe Load Indicator (ASLI) is a device which is installed on Lattice or Crawler
cranes to alert the operator if the lift is exceeding the safe operating range of the crane.
In some cases, the device will physically lock the equipment in circumstances it determines to
be unsafe. LMI systems are usually composed of a microprocessor connected to various sensors on
the crane itself. The LMI measures the angle and extension of the boom along with the load weight
and compares this with the manufacturer's specifications to determine if the lift is safe.
A safe
load indicator has the capability of detecting the angle, weight of load lifted, and ground radius
of any lifting device. It controls the lifting equipment to the level that it tries to keep the crane
functioning as per the manufacturer's suggested safety charts.
The crane is fitted with multiple sensors, for each of the measured parameters, which are then further
displayed in the operator's cabin for his benefit
Why to install crane safe load moment indicator system?
Safe load indicators come for different types of cranes including crawler cranes, hydraulic cranes, port cranes, rail cranes, tower cranes, telescopic cranes, and boom cranes. Safe load indicators help crane operators by providing critical information that the operator requires to make a decision regarding the lifting of the weight.
Crane Safe Load Indicators have multiple alert options such as:
1. To alert for maximum angle exceeded - this helps the crane operator whether the load is in danger of falling or not to go beyond that angle.
2. To alert for maximum load - of course, this is the basic purpose of the crane safe load indicators.
3. To alert for maximum radium exceeded - so the crane's operator knows that the load might be at risk of falling if it is raised any further.
4. To alert for maximum wind speed exceeded - so the crane operator can make appropriate speed and height adjustments.
There are many advantages of using safe load indicator - from cost reductions and better control to safety.
.
How Does a Load Moment Indicator Alarm Working?
Sound and light alarm function: when the crane boom work amplitude limit close to work, when lifting
load and torque device close to the permitted load limit, LMI system issued a warning of slow beeping sound.
Warning lights flashing slowly torque system.
When jib frame work scope to work limit, when the lifting load
and torque reaches equipment when the permitted load limit moment send urgent alarm beeping sound.
Shortness of torque system alarm indicating red light flashing.
• The LMI is an operational aid that warns a
crane operator of approaching overload conditions and over hoist conditions that could cause damage to equipment
and personnel.
• The device is not, and shall not, be a substitute for good operator judgment, experience and use of accepted safe crane operating procedures.
•
The responsibility for the safe crane operation shall remain with the crane operator who shall ensure that all
warnings and instructions supplied are fully understood and observed.
• Prior to operating the crane,
the operator must carefully and thoroughly read and understand the information in this manual to ensure
that he knows the operation and limitations of indicator and crane.
• Proper functioning depends upon proper
daily inspection and observance of the operating instructions set forth in the operators manual.
What's The Load Moment Indicator Protection function ?
Control output function: when boom amplitude limit close to work,
work when lifting load and torque device close to the permitted load limit, the system output torque control
signal to stop the crane continue to continue to run in the direction of risk, allow crane moves in the
direction of security.
• can keep the crane safe from accidents
• help the operator to verify all the necessary parameters to work in the right and practical way
1. 8 Inch Color Touched LCD Display
2. Data control box
3. SHL Rope Rider three-pully load sensor
4. Boom angle-length sensor
5. GJ Anti Two Block Limit Switch
1. ISO,CE,CCS certification;
2. Data protection even unexpected power cutoff;
3. With data logging, supported operating data download and analysis;
4. Various kinds of data all dispay in one screen, danamic graphics changable for crane type;
5. Easy operation, intelligent human-computer interaction;
6. Double language - English and Chinese shift freely;
7. Water-proof and dust-proof,anti-collision;
Packaging & Shipping
1. Using non-fumigation wooden box and standard export paper carton for package;
2. Standard delivering within 15 working days, customized products 25 -35 working days;
3. Shipping by DHL or by air or others.
Our Services
1. Installation guide by remote or on site service both are workable ;
2. Technical support directly from manufacture, to help you easily solve the trouble shootings in time.
Application:
KOBELCO 7150,CC2500,CKE2500,HITACHI CX1100,HITACHI KH300-3,HITACHI KH700,IHI CCH1500-3,IHI CCH500T,KH180-3,KH-300-3,KH700-2,KH850-3,KOBELCO 7035,KOBELCO 7055,KOBELCO 7080,M18000,Manitowoc M250,PH 670WLC,QUY120,QUY50A,SUMITOMO LS120RH5,SUMITOMO LS138RH5,SUMITOMO LS218RH5,sumitomo SC 2500,Sumitomo SC 500-2,sumitomo SC 650,Zoomlion QUY70 sumitomo LS248
KATO KR25H,KATO KR35H,KATO KR50H,Kato SS-500sp,KOBELCO RK250-5,Kobelco RK450-2,LINK BELT 8050,LINK BELT
8090,P-H-CN150,QY70K,SANY QY25C,SUMITOMO SA1100,TADANO ATF 110G-5,TADANO GR700EX,TADANO TG600M-1,TADANO
TL-201,TADANO TL-360,TADANO TR-200M,TADANO TR-250M,TADANO TR-350M,TADANO TR-500E,Tadano TR-500-EX,TADANO
TR500M,TADANO TR500XL,Terex A300,TEREX A600,TEREX RC 45
Contact Details
Contact : Cherry Duan
Weite Technologies Co.,ltd
Add: NO.6 Gangcheng Road,Yichang,Hubei,China(Mainland).
Tel: +86-717-7256059 Fax: + 86-717-6906018
Mobile):+ 86-15507209968